ָƱ

Malaysian Regular customers bought glass jars sealing machinery 4sizes jars vacuum capper
Published by: PENGLAI INDUSTRIAL CORPORATION
Date:2019-12-11 11:59:21

Our Regular customers from Mlaysia(South-eastern Asia) placed another order on one(1*) pcs of machine: model YX-30B vacuum capping machine for 4Sizes of jars semi automatic capper
For all the machines purchased it is clear to confirm all the information on the products so we often ask our customers to freight the samples to test and commission the machines in order that the machines and customer's products gains the best compatibility and adaptability.
After getting the confirmation &samples of the product in sizes and drawing for manufacturing the vacuum capping machines
we spent only 12 working days finishing everything and made the machines ready after testing them in a satisfactory feedback.
Recently our customers sent us the positive commentar on the machines which keep running very well in their factory ever since the machines arrived their factory.
The machines was delivered via ocean to theSelangor seaport. The documentaries certificated with ISO&CO&CE together with other files necessory are sent via DHL to customer for assisting customers to clear the custom.

As below there listed the basic information on the successful transaction between PENGLAI and their Malaysian counterpart:

Purchased order issued from South-eastern Asian customer:


Samples sent from customers in Selangor Malaysia:

Bank copy of Down&balance payment for purchasing model YX-30B vacuum capping machine semi automatic:


Testing videos on 4 sizes of square jars sealing capping machine semi automatic vacuum capper model YX-30B

Wooden case packing of Model YX-30B vacuum capping machine 4 sizes jars capper equipment

As follow there given the description on the capping machines purchased by Malaysian customers:

乐福彩票邀请码this series capping machine is researched and produced by ourself with years of production experience,

is the domestic original creation, it uses a vacuum pump to vacuum, available high vacuum degree,

乐福彩票邀请码capping torque and vacuum level can be set on demand compatible with a variety of different shapes and sizes of bottles for capping, strong compatibility and easy to adjust.

the main pneumatic and electrical components are from world famous brands, stable and reliable performance.

乐福彩票邀请码widely used in glass bottles with tinplate caps vacuum capping for the food, canned food, beverages, condiments, health care products and other industries.

rather than tightening from the sides as in an inline screw capper a chuck capper has a chuck that firmly grasps the cap and spins the cap onto the bottle from above and therefore the clutching mechanism can be set very accurately to control cap torque.

chuck capping machines are available from single head to multiple head high speed machines. the big advantage of a chuck capping machine is its scalability for high speed operation and of course its precise torquing of the cap. 

乐福彩票邀请码the disadvantage of a chuck capper is that each bottle size requires change parts and if the cap sizes change all of the chucks also have to change (not to mention the possiblity that sorting and cap conveying might also require change parts).

when considering a chuck capping machine, one should seriously consider using the same caps for all bottles on the line, as bottle change parts are relatively inexpensive to changing chucks for a variety of caps.

1.2  Main technical parameter of model YX-30B vacuum capping machine semi automatic for glass jars:

model yx-30b

乐福彩票邀请码power supply: ac220v/50-60hz

乐福彩票邀请码capping speed: 1200-1500bph

乐福彩票邀请码power: ≤1.3kw (include vacuum pump)

cap diameter: φ30-φ85mm φ85-φ110mm

bottle height: 50-180mm 120250mm

bottle diameter: φ30-φ80mm  φ80-φ150mm

limiting vacuum degree: -0.08mpa

capping torsion: 5-25n.m

air consumption: 0.5m3/0.7mpa

Machine should be customized according to the actual jars/bottles samples sent from customers

Operation instruction for semi automatic vacuum capping machine model YX-30B glass jars vacuum capper equipment:

乐福彩票邀请码a. structure and working priciples

乐福彩票邀请码picture1 vacuum capping machine

乐福彩票邀请码(1) working principles and functions

乐福彩票邀请码  this machine is consisted of machine frame, upper mould down mould, rotary position system,capping structure, vacuum system, electric and pressure control system. working as: put the glass with caps into the down mould, then put the down mould down to the center of the capping head by hand. then the machine will be automatically capping with vacuum.

this machine has below functions as

乐福彩票邀请码2.11when you put the down mould to the center of the capping head, the machine will automatically capping with vacuum

2.1.2The lowest vacuum set function: if the machine can not reach the vacuum degree as set before, the machine will not working for the next procedure

2.1.3capping torque function The capping head is moved by air cylinder, and can be adjusted by pressure

 

2Main structure and components

2.2.1Vacuum pump and vacuum tankVacuum pump and vacuum tank is used to achieve vacuum function, the vaccum pump should be with vacuum oil, half of vacuum oil inside is ok. Not allowed to use the machine if there is no more vacuum oil inside

Picture2 Vaccum tank and vacuum pump

 

Pls connect the vacuum pump and vacuum tank as above picture and supply power

 

2.2.2Rotary plate structure


Picture3

This rotary plate is moved by 4 steps  To ensure rotary plate moved steadily, this rotary plate adopt 3 friction plates to supply resistance to ensure steady movement. Must keep the machine clean while working, and the friction plates will be wear gradually, check regularly and change regularly.



Picture4

The rotary plate is moved by main motor, when the signal detector move to the start proximity switches and get signals(signal detector and proximity switches is about 2-3mm),upper mould move to capping, when it is capping, the motor still working, when the signal detector move to safety proximity switches and get signal, the motor stop working.


Picture5

Arm copper sets will be wear while working, must put some grease onto it regularly and change when it is damaged. When change you can see picture5

 

2.2.3Capping structure

1capping head

The capping head is moved by cylinder to lift and down, when the capping head is down to capping and reach the vacuum degree as set before, the capping head will move to the next procedure. The capping torque can be adjusted by capping pressure button on the control panel(As you can see in the control panel)

The red rubber inside the capping head is the easy wear part, need to check and change often. When capping, the capping head must put tight to the caps, you can put something inside the down mould to achieve different heights. But the height can not be too much, or if it is too height, you can not achieve vacuum function, but if it is not enough height, it can not be capped. Usually the distance for the caps and top of the down mould is 16mm-19mm

2Bottle click device


Picture7

Bottle click device is to fix the bottle while capping, when the rotary plate is to position, the bottle click cylinder move to fix the bottle to ensure good capping

    Main technical parameter of model YX-30B vacuum capping machine semi automatic:

3.1Dimensions600L×600W×1350H

3.2Weightabout110 K

3.3Power supplyAC220V5060Hz

3.4PowerQ150W(without vacuum pump)

3.5Air pressure0.50.8 MPa

3.6Air consumption≤0.2m3/min

3.7Speed about25 bottlesmin

3.8Capping diametercustomized

3.9Bottle sizes customized

Installation

1.The machine must be in a clean and safe place

2.Be sure the emergency stop is availablepicture 5

3.    Supply with power to check

4.Connect the machine with gas pipeline to the oil and water separator , adjust air pressure to 0.6Mpa

5. Connect the vacuum tank to the machine. Make sure no gas leak.

Picture8
5.1 Control panel operation

panel of vacuum capping machinery.jpg 

Pictures

The control panel consist of capping pressure table, capping pressure adjustment, counter, power switch, vacuum adjustment and emergency stop.

5.1.1 The capping pressure adjustment can be used to adjust the capping torque, when it is clockwise, the pressure increased, the capping torque is stronger, when it is counterclockwise, the pressure decreased, the capping torque is smaller.

5.1.2 Emergency stop, when something emergency happen, push the emergency stop switch, then the machine will be in safe situation

5.1.3 The counter is to count how many glasses you have produced, if you put the reset button, the counter will be count as zero.

5.1.4 If need to adjust the vacuum degree, push the “M” in the vacuum adjusted table, and it will display”St1”, push “”“” to adjus

5.2Oil and water separator and pressure and adjustmentpicture10

 


 

Picture10

Oil and water separator is consist of hand control valve,  pressure adjust, air pressure table, oil adjust, air filter and lubricator

Hand control valve is to turn on and off the whole air supply of the machine

Pressure adjust is to supply the pressure to the machine, when it is clockwise, pressure increased, when it is counterclockwise,  pressure decreased.

Air pressure table is to display the machine working pressure

Oil adjust is to supply oil to the machine, when it is clockwise, the oil decreased, when it is counterclockwise, the oil increased

Air filter is to remove the water of the compress air, when the pressure of the oil and water separator is zero, the air filter will be remove the water automatically.

Lubricator is to supply oil for the machine, first need to shut off the air supply, and put some oil into the lubricator, about 2-3 months per time.

 

Electric  drawing for vacuum capping machine 

 Spare parts for mould to suit different sizes of jars/bottles

Wooden case packing for model YX-30B vacuum capper before shipping:

 

ŲƱ,,ٷַ ֲapp ŲƱ쵥 Ųapp ֲapp׼ ŲƱַǶ app Ųʹ Ųapp ְ˲Ʊ